JN0-692 Exam Dumps


Prepare these JN0-692 dumps and pass your exam. JN0-692 practice exam questions answers are collected from real paper. Keep visiting for JN0-692 study material or JN0-692 dumps.

JNCIP-SP Exam Objectives (Exam: JN0-692)

The Juniper Networks Certification Program (JNCP) Service giver Routing & Switching Support certification track is a program that permits members to reveal competence with Juniper Networks technology. Successful contenders display thorough understanding of service giver routing & switching troubleshooting on Junos devices.
This list provides a general view of the skill set required to successfully complete the specified certification exam. Exam code: JN0-692
Exam length: 90 minutes
Exam type: 65 multiple-choice questions
Scoring and pass/fail status is available immediately

JN0-692 Dumps

For free JN0-692 practice test online Click Here
Interested in starting a career with Juniper Technologies Certification? You made an absolutely right decision. With Juniper dumps, you will be able to get this certification in a stress-free manner and master the skills to use Juniper technologies and products.

juniperexams.com is one of the top certification providers offering a prospering career to the IT professionals. Get the most updated JN0-692 Real exam questions with the correct answers here! We are sure about that you will not find JN0-692 dumps of such quality anywhere in the market. Save extra money by getting 90-days of free updates after purchasing the Juniper JN0-692 PDF. You can find these useful dumps by using some keywords, like JN0-692 Braindumps, Free JN0-692 Questions Answers, Free Juniper JN0-692 Study Material, and so on…Guaranteed pass with secure purchase and 24/7 Online Customers service.

JN0-692 Dumps Free

JN0-692 Free Braindumps | R1 and R2 are IS-IS…

Questions: 33

R1 and R2 are IS-IS Level 1 routers, but are not forming an adjacency.

Which two reasons would account for this happening? (Choose two.)

A. The remote router is configured for both IPv4 and IPv6.
B. The remote router does not have family iso enabled on its interface,
C. The remote router does not have family clns enabled on its interface.
D. The remote router is not configured to participate in the same Level 1 area

Answer: BD

JN0-692 | One of your router’s OSPF adjacencies is down…

Question: 33

One of your router’s OSPF adjacencies is down. What are three reasons for this adjacency state change? (Choose Three)

A. A filter has just been configured on one of the OSPF routers.
B. The OSPF hello value is the same on both routers.
C. The controlling BFD session state has gone down.
D. The authentication key on both routers matches.
E. One of the physical interfaces has gone down.

Answer: A,C,E

JN0-692 | You have recently implemented a new Layer…

Question: 32

You have recently implemented a new Layer 2 VPN and it is not establishing. The show I2vpn connections command displays an out-of-range state. What is causing this problem?

A. The local site ID value is too high for the label block.
B. The VRF target community values do not match between sites.
C. The VRF route distinguisher values do not match between sites.
D. The local site ID is not defined.

Answer: A

JN0-692| the last-hop router’s information….

Question: 30

Click the Exhibit button.

— Exhibit —
pim {
spt-threshold {
infinity mcast;
}
rp {
static {
address ;
}
}
interface ge-0/0/0.0 {
disable;
}
interface ge-0/0/3.0;
interface ge-0/0/4.0;
}
policy-statement mcast {
term 1 {
from {
route-filter 224.0.0.0/4 orlonger;
}
then accept;
}
}
— Exhibit —
Referring to the last-hop router’s information shown in the exhibit, multicast flows are using a suboptimal path. What is the reason?

A. All flows are traversing the rendezvous point because of the configuration.
B. RPF is failing for the entire multicast range.
C. All flows are switching over to SPT too fast.
D. The SPT policy is using the wrong subnet mask for the multicast range

Answer: A

JN0-692|You have been asked to establish an IPv6

Question: 29

Click the Exhibit button.
You have been asked to establish an IPv6 EBGP peering between R1 and a customer’s router. You have an existing IPv4 EBGP peering to this device. After adding the IPv6 neighbor configuration to the existing EBGP group configuration, the IPv4 neighborship is down and will not establish.
Referring to the exhibit, what should you do to resolve this problem?

A. Move the inet6 unicast statement to the global BGP hierarchy.
B. Enable the inet unicast NLRI for this neighbor.
C. Change the order of the neighbor configurations so IPv6 is first.
D. Change the inet6 NLRI configuration to use any instead of unicast.

Answer: B

JN0-692|which configuration was used to load-balance traffic across

Question: 28

Click the Exhibit button.

user@router> show route 100.1.1.0
inet.0: 17 destinations, 19 routes (16 active, 0 holddown, 0 hidden)
+ = Active Route, – = Last Active, * = Both
100.1.1.0/24 *[BGP/170] 00:08:51, localpref 100
AS path: 65000 I
to 17.3.1.4 via xe-5/2/0.0
> to 17.1.1.1 via xe-5/2/1.0
[BGP/170] 00:08:51, localpref 100
AS path: 65000 I
> to 17.3.1.4 via xe-5/2/0.0

Referring to the exhibit, which configuration was used to load-balance traffic across xe-5/2/0 and xe-5/2/1 interfaces?

A. set protocols bgp group CUST multipath
B. set protocols bgp group CUST advertise-inactive
C. set protocols bgp group CUST metric-out igp
D. set protocols bgp group CUST multihop

Answer: A

JN0-692|You have applied a customized EXP rewrite rule on router

Question: 27

You have applied a customized EXP rewrite rule on router R1 on the egress of the interface connecting to router R2. You want to verify if it is working properly. Which two methods would you use to accomplish this task? (Choose two.)

A. Apply a rewrite rule on the ingress of R2 for packets coming in from R1 and count those packets for the new
EXP values with a firewall filter as they leave R2.
B. Use the traceroute utility.
C. Use an output filter on R1 that matches and counts on various EXP values on packets going to R2.
D. Use an input firewall filter on R2 that matches and counts on various EXP values on packets coming from R1.

Answer: C,D

JN0-692|Which three statements are correct about rpd related troubleshooting

Question: 26

Which three statements are correct about rpd related troubleshooting on devices running the Junos OS? (Choose three)

A. A log for rpd scheduler slip is an indication of something that should be investigated and resolved.
B. A log for rpd scheduler slip is a common, harmless syslog and can be ignored.
C. A possible cause for an overworked rpd is excessive protocol tracing.
D. A possible method to troubleshoot rpd scheduler slips is to temporarily enable task accounting.
E. Excessive protocol tracing can never be a cause for an overworked rpd.

Answer: A,C,D

JN0-692|An OSPF neighbor between routers R1 and R2 is stuck in loading state on R2. What are two causes?

Question: 25

An OSPF neighbor between routers R1 and R2 is stuck in loading state on R2. What are two causes? (Choose two.)

A. OSPF is not enabled on the interfaces.
B. A firewall filter is blocking OSPF hellos on both sides.
C. The R1 router has received a corrupted link-state request packet.
D. The interface MTU is mismatched between the routers.

Answer: CD

What are three reasons for this adjacency state change?

Question: 24

One of your router’s OSPF adjacencies is down.
What are three reasons for this adjacency state change? (Choose Three)

A. A filter has just been configured on one of the OSPF routers.
B. The OSPF hello value is the same on both routers.
C. The controlling BFD session state has gone down.
D. The authentication key on both routers matches.
E. One of the physical interfaces has gone down.

Answer: ACE