JN0-360 Exam Dumps


Prepare these JN0-360 dumps and pass your exam. JN0-360 practice exam questions answers are collected from real paper. Keep visiting for JN0-360 study material or JN0-360 dumps.

JNCIS-SP Exam Objectives (Exam: JN0-360)

(JNCP) The Juniper Networks Certification Program Junos Security certification track is a program that permits members to show capability with Juniper Networks technology. Booming contenders show thorough understanding of safety technology in general & Junos software for SRX Series devices.
This list provides a general view of the skill set required to successfully complete the specified certification exam.

Topics listed are subject to change.
Protocol-Independent Routing
1.Identify the concepts, operation and functionality of various protocol-independent routing Open Shortest Path First (OSPF)
1.Identify the concepts, operation and functionality of OSPF Intermediate System to Intermediate System (IS-IS)
1.Identify the concepts, operation and functionality of IS-IS Border Gateway Protocol (BGP)
1.Identify the concepts, operation and functionality of BGP Layer 2 Bridging and VLANs
1.Identify the concepts, operation, and functionality of Layer 2 bridging for the Junos OS Spanning-Tree Protocols
1.Identify the concepts, benefits, operation, and functionality of Spanning Tree Protocol and its Multiprotocol Label Switching (MPLS) and MPLS VPNs
1.Identify the concepts, operation, and functionality of MPLS IPv6
1.Identify the concepts, operation and functionality of IPv6 Tunnels
1.Identify the concepts, requirements and functionality of IP tunneling High Availability
1.Identify the concepts, benefits, applications and requirements of high availability

JN0-360 Dumps

Exam code: JN0-360
Exam length: 90 minutes
Exam type: 70 multiple-choice questions
Scoring and pass/fail status is available immediately
Interested in starting a career with Juniper Technologies Certification? You made an absolutely right decision. With Juniper dumps, you will be able to get this certification in a stress-free manner and master the skills to use Juniper technologies and products.

juniperexams.com is one of the top certification providers offering a prospering career to the IT professionals. Get the most updated JN0-360 Real exam questions with the correct answers here! We are sure about that you will not find JN0-360 dumps of such quality anywhere in the market. Save extra money by getting 90-days of free updates after purchasing the Juniper JN0-360 PDF. You can find these useful dumps by using some keywords, like JN0-360 Braindumps, Free JN0-360 Questions Answers, Free Juniper JN0-360 Study Material, and so on…Guaranteed pass with secure purchase and 24/7 Online Customers service.

JN0-360 | Which statement is true of a Layer 2 circuit…

Question: 44

Which statement is true of a Layer 2 circuit?

A. Layer 2 circuits use BGP for signaling
B. Layer 2 circuits use OSPF for signaling
C. Layer 2 circuits use LDP for signaling
D. Layer 2 circuits rely on RSVP for signaling

Answer: C

JN0-360 | Which two statements are correct regarding…

Question: 43

Which two statements are correct regarding LDP-signaled VPLS instances? (Choose two.)

A. You must enable the Layer 2 VPN signaling NLRI.
B. You must configure the same VPLS identifier on all peers.
C. You must define a the same site-identifier value on all peers.
D. You must define all neighbors using their tunnel end-point IP addresses.

Answer: B,D

JN0-360 | Which two statements regarding the MPLS label…

Question 42:

Which two statements regarding the MPLS label information base are correct? (Choose two.)

A. The MPLS label information base is stored in the inet.3 table.
B. The MPLS label information base is stored in the mpls.0 table.
C. The label information base is used by all LSRs to forward LSP traffic.
D. The label information base is used by transit LSRs to forward LSP traffic.

Answer: B,D

Explanation:

Labels represent the FEC along the LSP from the ingress node to the egress node. The label is prepended to the packet when the packet is forwarded to the next hop. Each label is valid only between a pair of LSRs. A downstream LSR reached by a packet uses the label as an index into a table that contains both the next hop and a different label to prepend to the packet before forwarding. This table is usually referred to as a label information base (LIB).

LIB (Label Information Base) is the software table maintained by IP/MPLS capable routers to store the details of port and the corresponding MPLS router label to be popped/pushed on incoming/outgoing MPLS packets. Entries are populated from label-distribution protocols. LIB functions in the control plane of routers MPLS layer. It is used by the label distribution protocol for mapping the next hop labels.

JN0-360 | Which two statements are correct about default…

Question: 41

Which two statements are correct about default MPLS behavior on Junos devices? (Choose two.)

A. The MPLS label is popped by the penultimate router.
B. The MPLS label is popped by the ultimate router.
C. The MPLS label is pushed by the ingress router.
D. The MPLS label is swapped by the ingress router.

Answer: A,C

JN0-360 | Which statement is correct about…

Question: 40

Which statement is correct about the inet.3 routing table?

A. MPLS creates a copy of the mpls.0 table and stores it in the inet.3 routing table.
B. The inet.3 routing table is used by transit routers to identify label values.
C. BGP can use the inet.3 routing table to resolve next hops.
D. MPLS uses the inet.3 routing table to assign labels.

Answer: C

Explanation:

The IGPs and BGP store their routing information in the inet.0 routing table, the main IP routing table. If the traffic-engineering bgp command is configured, thereby allowing only BGP to use MPLS paths for forwarding traffic, MPLS path information is stored in a separate routing table, inet.3. Only BGP accesses the inet.3 routing table. BGP uses both inet.0 and inet.3 to resolve next-hop addresses. If the traffic-engineering bgp-igp command is configured, thereby allowing the IGPs to use MPLS paths for forwarding traffic, MPLS path information is stored in the inet.0 routing table.

JN0-360 | What are two characteristics of an interface…

Question: 39

What are two characteristics of an interface that has been placed in the blocking state by STP? (Choose two.)

A. It drops all data frames
B. It listens to received BPDUs
C. It uses learned MAC addresses to populate the MAC table
D. It forwards outbound data frames only

Answer: AB

JN0-360 | What are two characteristics of an…

Question: 38

What are two characteristics of an interface that has been placed in the blocking state by STP? (Choose two.)

A. It drops all data frames
B. It listens to received BPDUs
C. It uses learned MAC addresses to populate the MAC table
D. It forwards outbound data frames only

Answer: A,B

JN0-360 | Which command enables STP on an MX…

Question: 37

Which command enables STP on an MX Series device?

A. set protocols rstp force-mode stp
B. set protocols rstp mode stp
C. set protocols rstp version stp
D. set protocols rstp force-version stp

Answer: D

JN0-360 | An RSVP LSP in your network is operational…

Question: 36

An RSVP LSP in your network is operational but you are receiving complaints about network throughput across the LSP. You suspect that the RSVP bandwidth was omitted from the router configuration. Which operational mode command will help you verify your suspicions?

A. show interfaces terse
B. show mpls lsp extensive
C. show rsvp neighbor detail
D. show rsvp bandwidth

Answer: B